Skip to content
IDAHO
CATTLE GUARDS

Sizing

Cattle guard sizes and widths

Measure the travelled surface at its widest point, then order a guard wider than that. Most Idaho ranch roads end up on a 16 ft cattle guard; rural driveways are often 12 or 14 ft, and anything carrying public traffic or wide equipment goes to 20 ft and beyond.

Widths, and what each one actually fits

WidthSuitsWatch out for
12 ftDriveways and single-track lanesTight for anything that turns in at an angle
14 ftDriveways with a trailer, light ranch roadsStill narrow for wide implements
16 ftMost ranch roads and pasture entrancesThe common answer in Idaho for a reason
20 ftEquipment routes, feed truck access, shared roadsNeeds a bigger excavation and more base
24 ft+County roads, subdivision entrances, wide equipmentUsually highway-rated, usually concrete abutments

Available widths are whatever the manufacturer makes. We confirm against the spec sheet before quoting.

Measuring the opening for a cattle guardLooking down on a road between two fence lines. The travelled surface is measured first, then the guard is sized wider than it so equipment does not run off the end of the rails.GUARD WIDTHTRAVELLED SURFACESHOULDER EACH SIDEMEASURE THE SURFACE EQUIPMENT USES, NOT THE GAP BETWEEN POSTS
Measure the surface traffic actually uses, at the widest point, then size the guard wider than it. How much wider depends on what turns in - we settle it at the site review.

The measurement people get wrong

Gate posts are not the road. The number that matters is the width of the surface traffic uses, measured at the widest point of the approach - and then widened, because a trailer turning in off a county road does not arrive square.

The second thing people miss is length. The guard also has to be long enough in the direction of travel that stock will not step across it, and that dimension is set by the product, not by your opening.

Before you order a width

Measure
Travelled surface, widest point, in feet.
Add for turning
More width wherever equipment turns in off a road.
Check the equipment
Widest axle or implement that will cross, including duals.
Then the class
Width and load class are chosen together - load classes.

Wings change the effective width

Wings are not extra width on the rails - they are the flare from the end of the guard to the fence. What they buy you is a crossing that works at its edges: stock cannot walk around it, and equipment that comes in wide meets a sloped wing instead of the end of a frame.

When you need wings

Plan view: cattle guard, wings, fence tie-in and gateLooking down on a crossing. The guard sits in the road opening, wings flare out to meet the fence on each side, and a gate at least twelve feet long sits in the fence line within thirty-three feet of the highway.WINGSGUARD IN THE OPENINGGATE, 12 FT MINIMUMFENCE TIE-INROAD
On a public road, Idaho Code 40-2310 requires a gate at least 12 ft long in the connected fence, within 33 ft of the highway, kept unlocked.

Questions we get asked

What size cattle guard do most people need?
On Idaho ranch roads, 16 ft is the width that comes up most often. It covers a pickup and stock trailer, most tractors, and a feed truck without the driver having to aim. Driveways are frequently 12 or 14 ft.
How do I measure my opening?
Measure the travelled surface at its widest point - the part tyres actually use - not the gap between gate posts and not the fence opening. Then allow for equipment that swings wide turning in. Photograph the opening from 20 ft back and we will size it with you.
Should the guard be wider than the road?
Yes. The guard needs to be wider than the running surface so equipment stays on the rails when it turns in, and so livestock cannot find a comfortable path around the end. How much wider depends on the approach angle, which is a site-review question.
Can I put two guards side by side to get more width?
Some manufacturers make modular units designed to sit side by side; that is a product decision with a spec behind it, not something to improvise. Ask us what the manufacturer documents for the width you need.
Does a wider guard cost much more?
Yes, and in three places at once: more steel, a bigger excavation, and more base material. Width is the single biggest driver of total cost, which is why we size it carefully rather than rounding up.
Get my free quote